Call Us: 1 (803) 926-7272 -

Project Description

Industrial Application Example

industrial_1_whiteboxStudying the behavior of metals during a high-speed dynamic compression event has always been challenging due to the complex test set up and fast data capture rates required. Currently, very little literature is available regarding deformation behavior at strain rates of  10 to 500s-1. Utilizing high-speed cameras, the VIC-3D HS system can be used to quantify the surface displacements and strains in three dimensions over the entire field with great precision. Digital Image Correlation (DIC) has gained widespread popularity over recent years in such high-speed applications due to its high accuracy, flexibility and ease of use.

industrial_2In this example, a 6mm diameter cylindrical specimen was compressed at a strain rate of 50s-1. The VIC-3D HS system was used to capture the  surface displacements and  strains on  the  specimen during the event. A random speckle pattern is applied to the specimen that allows the analysis software to easily track the deformation to sub-pixel accuracy. Although the high- speed cameras are capable of much higher capture rates, for this test they were set to an appropriate frame rate of 14,400fps to maximize spatial resolution while acquiring an adequate number of images during the event. The cameras were post-trigger at a resolution of 1024 x 400 pixels. After the event, the images are transferred to the computer’s  hard  drive, and  then  post-processed using VIC-3D analysis software.

Images courtesy of Amos Gilat & Jeremy Seidt at Ohio State University.

View the VIC-3D High-Speed system for more information about this technology.

Back to Top