Fatigue/Vibration

The VIC-3D Fatigue & Vibration module is a powerful module that adds the capability of synchronizing image capture with a periodic event. VIC-Snap accurately triggers the cameras at peaks, valleys, or user-defined phase intervals, which are then analyzed to measure displacement and strain. High-frequency vibration measurements are possible when using a stroboscope.

Full-Field Real-Time

The VIC-3D Real-Time processing module allows full-field test data to be displayed live while a test is in operation. This module provides users with the information needed to make critical adjustments during a test, which has tremendous cost-saving potential. Data can be displayed at a rate of up to 10 Hz with 10,000 points per time step with an optimal setup.

VIC Gauge (real-time)

VIC-Gauge utilizes optimized 2D & 3D correlation algorithms to provide real-time displacement and strain data for mechanical testing. Data from the virtual strain gauges and/or virtual extensometers are recorded and may be outputted via the provided DAQ system up to the camera's max frame (e.g. 2.8MP @ 300Hz). The outputted data may then be used to control a test in real time.